Products/BlueSense/Distance sensor
From BlueMelon
Requirements
- BM7003 Analogue inputs
- Distance sensor Sharp GP2D12
- Wires (connector attached)
- Adaptor
Connecting
- Connect the left most wire (signal output) to one of the inputs of an analogue input.
- Then connect the middle wire (ground) to the - terminal of the analogue input.
- And last connect the right most wire (power supply) to a 5V positive power connection.
Software and documentation
- Datasheet: BM3009_datasheet.pdf
- BlueSense downloads
- Bluesense FAQ
- Tutorials and general information can be found on the following page: Information and examples
Examples
Below you can find examples of how to use the module in several programming environments. If there is no example you can look into the API reference manual.
 |  |  |  |  |  |  |  | ||
|---|---|---|---|---|---|---|---|---|---|
 | X | X | X | X | X | X | X | How to sample analog signals |
Relevant products
 | BM7003 Bluesense analogue inputs 6 analogue inputs, 1-10 bits resolution, max. 1000 samples/second. | € 59,- |
 | BM3009 Distance sensor Sharp GP2D12 Distance sensor for BlueSense | € 15,99 |
 | BM6001 Adaptor 9V 500mA External power supply for BlueSense, 230V->9V, 500mA, 4.5VA | € 5,- |
 | BM6002 Adaptor 12V 1200mA External power supply for BlueSense, 230V->12V, 1200mA, 14.4VA | € 7,50 |